deployment
Affordable, IoT-ready technology makes these systems easy to install and
integrate. Buildings benefit from lower insurance premiums, fewer claims,
and reduced water bills. With sustainability codes tightening and water
conservation becoming critical, leak detection is no longer optional.
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
Easy
Self-install in 1 hour, 1 day, 1 week.
Effective
24/7 fail-proof detection.
Affordable
2% the cost of traditional wired sensors.
extend the reach of your sensors!
Using Aware's plug in accessories designed with simplicity in mind.
CHOOSING THE RIGHT PLUG-IN ACCESSORIES
Selecting the appropriate accessories for your Aware Leak Sensor helps you achieve the right balance between:
AVOIDING FALSE NEGATIVES
-
Ensuring water is detected where it should be ensuring that all [potentially damaging water presence is detected.
AVOIDING FALSE POSITIVES
-
preventing alerts due to moisture that is normal or expected
The Aware Leak Sensor includes an auxiliary port that allows multiple accessory detectors to plug into the main sensor.
These accessories can extend detection range, reach difficult areas, or be set to trigger alerts only at specific water levels.
ACCESSORY OPTIONS
1) PRIMARY LEAK SENSOR
1) PRIMARY LEAK SENSOR
Aware Buildings’ Leak Sensor
detects water through two leak
pins on the bottom of the unit.
best uses • Kitchen floors • Bathroom
floors (especially behind toilets)
• Inside kitchen or bathroom sink
cabinets • Near washing machines or
water heaters
key characteristics • Detects very
small puddles of water • Works best
when placed flat on the floor • Detects
water only where the sensor is located.
2) SENSOR POSITIONING BRACKET
The Bracket anchors the leak
sensor in place, while still allowing
it to be lifted for cleaning, and
returned to its correct spot. Also
used for mounting a sensor
on a wall.
recommended locations • Kitchen
floors that are frequently mopped
• Bathroom floors • Under-sink
cabinets where objects may move
the sensor • Any location where the
sensor may be displaced
benefits • Keeps the sensor
consistently positioned• Provides a
visual reminder of where the sensor
belongs • Makes it obvious if a sensor
has been moved or removed • Allows
easy lift-out for cleaning
EXTEND YOUR SENSORS' REACH!
If you want to monitor larger areas or hard-to-reach locations, consider adding one of the accessories below:
3) LEAK ROPE
The Leak Rope is a variable length
sensing cable that detects water
anywhere along its length.
best uses • Dropped ceilings with
overhead piping • Pipe chases
(fed through a small drilled hole)
• Around the back and sides of
washing machine • Long mechanical
runs where multiple sensors would
otherwise be required
important • Because the rope is
extremely sensitive, it is best
deployed in areas that are normally
completely dry.
4) LEAK PUCK
The Leak Puck extends detection
to additional locations and can be
daisy-chained together from one
main sensor.
best uses • Under dishwashers
• Under refrigerators • Mechanical
rooms needing multiple detection
points • Inside sink cabinets with
multiple plumbing fixtures
orientation feature • Side A detects
approximately 1 mm of water • Side B
detects approximately 7 mm of water.
This allows the puck to be flipped over
for either very sensitive detection, or
higher water-level alerts.
6) SENSOR BASE
The Sensor Base, is a rising-water
accessory.
recommended location • Mechanical
room floors that are routinely washed
down. Outdoor patios or roofs where
drains get clogged.
benefits • Enables detection of rising
water at a level higher than the normal
sensor's level of 2.5mm. Also available
in 3/4" heights by default, and in a
range of other heights upon request.
5) LEAK DOME
HVAC Condensation Pan Sensor
The Leak Dome is designed
specifically for HVAC and fan coil
unit condensation pans. It detects
when a drain blockage causes
water in the pan to rise above a
specified level.
configurable activation heights
0.4 inches • 0.6 inches • 0.9 inches
key feature The dome cover shields
the leak pins so dripping water from
above will not trigger an alert, which is
common in HVAC fan coil units.
7) SENSOR CABOOSE
The Sensor Caboose attaches to
a basic leak sensor, and allows for
leak detection when positioned
on its side, in either a vertical or
horizontal position.
best uses • Behind toilet • Against
kitchen toe-kick • along edge of room
where discretion matters • In any thin
space where basic sensor lying flat will
not fit, and where cables for probes
are undesirable.
awarebuildings.com
8) SENSOR CASE
The Sensor Caboose attaches to
a basic leak sensor, and allows for
leak detection when positioned
on its side, in either a vertical or
horizontal position.
best uses • Behind toilet • Against
kitchen toe-kick • along edge of room
where discretion matters • In any thin
space where basic sensor lying flat will
not fit, and where cables for probes
are undesirable.
awarebuildings.com
ACCESSORY OPTIONS
The Aware leak sensor includes a 3.5 mm audio-jack port that allows multiple accessory detectors to plug into the main sensor.
These accessories extend detection range, reach difficult areas, or trigger alerts only at specific water levels.
CHOOSING THE RIGHT PLUG-IN ACCESSORIES
Selecting the appropriate accessories for your Aware Leak Sensor helps you achieve the right balance between:
AVOIDING FALSE NEGATIVES
-
Ensuring water is detected where it should be.
1) BASIC SENSOR
The basic sensor detects water through two
leak pins on the bottom of the unit.
best uses
-
Kitchen floors
-
Bathroom floors (especially behind toilets)
-
Inside kitchen or bathroom sink cabinets
-
Near washing machines or water heaters
key characteristics
-
Detects very small puddles of water
-
Works best when placed flat on the floor
-
Detects water only where the sensor is located
EXTEND YOUR SENSORS' REACH!
If you want to monitor larger areas or hard-to-reach locations, consider adding one
of the accessories below:
AVOIDING FALSE POSITIVES
-
preventing alerts from moisture that is normal or expected
2) SENSOR POSITIONING BRACKET
The Bracket anchors the leak it to be lifted for cleaning and anchoring its spot.
Also used for mounting a sensor on a wall (useful if an accessory is attached to it) recommended locations
-
Kitchen floors that are frequently mopped
-
Bathroom floors
-
Under-sink cabinets where objects may move the sensor
-
Any location where the sensor may be displaced benefits
-
Keeps the sensor consistently positioned
-
Provides a visual reminder of where the sensor belongs
-
Makes it obvious if a sensor has been moved or removed
-
Allows easy lift-out for cleaning
3) LEAK ROPE
The Leak Rope is a rope-style sensing cable that detects water anywhere along its length.
best uses
-
Dropped ceilings with overhead piping
-
Pipe chases (fed through a small drilled hole)
-
Around the back and sides of washing machine
-
Long mechanical runs where multiple sensors would otherwise be required important!
Because the rope is extremely sensitive, it should be used only in locations where any moisture
is abnormal.
4) LEAK PUCK
The Leak Puck extends detection to additional locations and can be daisy-chained together from one main sensor.
best uses
-
Under dishwashers
-
Under refrigerators
-
Mechanical rooms needing multiple detection points
-
Inside sink cabinets with multiple plumbing fixtures
orientation feature
-
Side A - detects approximately 1 mm of water
-
Side B - detects approximately 7 mm of water. This allows the puck to be flipped over for either very sensitive detection or higher-level alerts.
5) LEAK PROBE
The Leak Probe is a two-pin sensor at
the end of a 1 meter cable designed
for detecting water at a precise point.
best uses
-
Touching the floor for extremely sensitive wet-floor detection
-
Clipped onto the side of a pan to detect water at a certain level
-
Detecting water inside tight spaces where a full sensor cannot fit
-
Monitoring specific components or equipment
6) LEAK DOME
(HVAC Condensation Pan Sensor)
The Leak Dome is designed specifically for HVAC and fan coil unit condensation pans. It detects when a drain blockage causes water in the pan to rise above a specified level.
configurable activation heights
0.4 inches • 0.6 inches • 0.9 inches
key feature
The dome cover shields the leak pins so dripping water from above will not trigger an alert, which is commonin HVAC fan coil units.
7) SENSOR CABOOSE
The sensor caboose attaches to a basic leak sensor, and allows for leak detection when positioned on its side, in either a vertical or horizontal position.
purpose
-
Touching the floor for extremely sensitive wet-floor detection
-
Clipped onto the side of a pan to detect water at a certain level
-
Detecting water inside tight spaces where a full sensor cannot fit
-
Monitoring specific components or equipment
best uses
-
Behind toilet
-
Against kitchen toe-kick
-
Along edge of room where discretion matters
-
In any thin space where basic sensor lying flat will not fit, and cables for probe are undesirable
extend the reach of your sensors!
Using Aware's plug in accessories designed with simplicity in mind.
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
LoRaWAN network
NETWORK MATTERS
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
extend the reach of your sensors!
Using Aware's plug in accessories designed with simplicity in mind.
CHOOSING THE RIGHT PLUG-IN ACCESSORIES
Selecting the appropriate accessories for your Aware Leak Sensor helps you achieve the right balance between:
AVOIDING FALSE NEGATIVES
-
Ensuring water is detected where it should be.
AVOIDING FALSE POSITIVES
-
preventing alerts from moisture that is normal or expected
The Aware leak sensor includes a 3.5 mm
audio-jack port that allows multiple accessory detectors to plug into the main sensor.
These accessories extend detection range, reach difficult areas, or trigger alerts only at specific water levels.
ACCESSORY OPTIONS
EXTEND YOUR SENSORS' REACH!
If you want to monitor larger areas or hard-to-reach locations, consider adding one of the accessories below:
Aware's Klondike LK-207 Sensor
The basic sensor detects water through twovleak pins on the bottom of the unit.
best uses
-
Kitchen floors
-
Bathroom floors (especially behind toilets)
-
Inside kitchen or bathroom sink cabinets
-
Near washing machines or water heaters
key characteristics
-
Detects very small puddles of water
-
Works best when placed flat on the floor
-
Detects water only where the sensor is located
-
Sensor Positioning Bracket
The Bracket anchors the leak it to be lifted for cleaning and anchoring its spot.
Also used for mounting a sensor on a wall (useful if an accessory is attached to it) recommended locations
-
Kitchen floors that are frequently mopped
-
Bathroom floors
-
Under-sink cabinets where objects may move the sensor
-
Any location where the sensor may be displaced benefits
-
Keeps the sensor consistently positioned
-
Provides a visual reminder of where the sensor belongs
-
Makes it obvious if a sensor has been moved or removed
-
Allows easy lift-out for cleaning
-
Leak Rope
The Leak Rope is a rope-style sensing cable that detects water anywhere along its length.
best uses
-
Dropped ceilings with overhead piping
-
Pipe chases (fed through a small drilled hole)
-
Around the back and sides of washing machine
-
Long mechanical runs where multiple sensors would otherwise be required important!
Because the rope is extremely sensitive, it should be used only in locations where any moisture
is abnormal.
-
Leak Puck
The Leak Puck extends detection to additional locations and can be daisy-chained together from one main sensor.
best uses
-
Under dishwashers
-
Under refrigerators
-
Mechanical rooms needing multiple detection points
-
Inside sink cabinets with multiple plumbing fixtures
orientation feature
-
Side A - detects approximately 1 mm of water
-
Side B - detects approximately 7 mm of water. This allows the puck to be flipped over for either very sensitive detection or higher-level alerts.
-
Leak Probe
The Leak Probe is a two-pin sensor at
the end of a 1 meter cable designed
for detecting water at a precise point.
best uses
-
Touching the floor for extremely sensitive wet-floor detection
-
Clipped onto the side of a pan to detect water at a certain level
-
Detecting water inside tight spaces where a full sensor cannot fit
-
Monitoring specific components or equipment
-
Leak Dome
(HVAC Condensation Pan Sensor)
The Leak Dome is designed specifically for HVAC and fan coil unit condensation pans. It detects when a drain blockage causes water in the pan to rise above a specified level.
configurable activation heights
0.4 inches • 0.6 inches • 0.9 inches
key feature
The dome cover shields the leak pins so dripping water from above will not trigger an alert, which is commonin HVAC fan coil units.
Sensor Caboose
The sensor caboose attaches to a
basic leak sensor, and allows for
leak detection when positioned
on its side, in either a vertical or
horizontal position.
purpose
-
Touching the floor for extremely sensitive wet-floor detection
-
Clipped onto the side of a pan to detect water at a certain level
-
Detecting water inside tight spaces where a full sensor cannot fit
-
Monitoring specific components or equipment
best uses
-
Behind toilet
-
Against kitchen toe-kick
-
along edge of room where discretion matters
-
In any thin space where basic sensor lying flat will not fit, and cables for probe are undesirable
-
extend the reach of your sensors!
Using Aware's plug in accessories designed with simplicity in mind.
CHOOSING THE RIGHT PLUG-IN ACCESSORIES
Selecting the appropriate accessories for your Aware Leak Sensor helps you achieve the right balance between:
AVOIDING FALSE NEGATIVES
-
Ensuring water is detected where it should be.
AVOIDING FALSE POSITIVES
-
preventing alerts from moisture that is normal or expected
The Aware leak sensor includes a 3.5 mm
audio-jack port that allows multiple accessory detectors to plug into the main sensor.
These accessories extend detection range, reach difficult areas, or trigger alerts only at specific water levels.
ACCESSORY OPTIONS
EXTEND YOUR SENSORS' REACH!
If you want to monitor larger areas or hard-to-reach locations, consider adding one of the accessories below:
Aware's Klondike LK-207 Sensor
The basic sensor detects water through twovleak pins on the bottom of the unit.
best uses
-
Kitchen floors
-
Bathroom floors (especially behind toilets)
-
Inside kitchen or bathroom sink cabinets
-
Near washing machines or water heaters
key characteristics
-
Detects very small puddles of water
-
Works best when placed flat on the floor
-
Detects water only where the sensor is located
-
Sensor Positioning Bracket
The Bracket anchors the leak it to be lifted for cleaning and anchoring its spot.
Also used for mounting a sensor on a wall (useful if an accessory is attached to it) recommended locations
-
Kitchen floors that are frequently mopped
-
Bathroom floors
-
Under-sink cabinets where objects may move the sensor
-
Any location where the sensor may be displaced benefits
-
Keeps the sensor consistently positioned
-
Provides a visual reminder of where the sensor belongs
-
Makes it obvious if a sensor has been moved or removed
-
Allows easy lift-out for cleaning
-
Leak Rope
The Leak Rope is a rope-style sensing cable that detects water anywhere along its length.
best uses
-
Dropped ceilings with overhead piping
-
Pipe chases (fed through a small drilled hole)
-
Around the back and sides of washing machine
-
Long mechanical runs where multiple sensors would otherwise be required important!
Because the rope is extremely sensitive, it should be used only in locations where any moisture
is abnormal.
-
Leak Puck
The Leak Puck extends detection to additional locations and can be daisy-chained together from one main sensor.
best uses
-
Under dishwashers
-
Under refrigerators
-
Mechanical rooms needing multiple detection points
-
Inside sink cabinets with multiple plumbing fixtures
orientation feature
-
Side A - detects approximately 1 mm of water
-
Side B - detects approximately 7 mm of water. This allows the puck to be flipped over for either very sensitive detection or higher-level alerts.
-
Leak Probe
The Leak Probe is a two-pin sensor at
the end of a 1 meter cable designed
for detecting water at a precise point.
best uses
-
Touching the floor for extremely sensitive wet-floor detection
-
Clipped onto the side of a pan to detect water at a certain level
-
Detecting water inside tight spaces where a full sensor cannot fit
-
Monitoring specific components or equipment
-
Leak Dome
(HVAC Condensation Pan Sensor)
The Leak Dome is designed specifically for HVAC and fan coil unit condensation pans. It detects when a drain blockage causes water in the pan to rise above a specified level.
configurable activation heights
0.4 inches • 0.6 inches • 0.9 inches
key feature
The dome cover shields the leak pins so dripping water from above will not trigger an alert, which is commonin HVAC fan coil units.
Sensor Caboose
The sensor caboose attaches to a
basic leak sensor, and allows for
leak detection when positioned
on its side, in either a vertical or
horizontal position.
purpose
-
Touching the floor for extremely sensitive wet-floor detection
-
Clipped onto the side of a pan to detect water at a certain level
-
Detecting water inside tight spaces where a full sensor cannot fit
-
Monitoring specific components or equipment
best uses
-
Behind toilet
-
Against kitchen toe-kick
-
along edge of room where discretion matters
-
In any thin space where basic sensor lying flat will not fit, and cables for probe are undesirable
-
Add paragraph text. Click “Edit Text” to update the font, size and more. To change and reuse text themes, go to Site Styles.
NETWORK
annunciator
app
gateway
sensors
Aware Buildings' solutions are made of three simple components. Gateways, sensors and a variety of attachments for unique monitoring tasks.
Sensors
Gateways are placed at various
intervals and locations throughout
the building. The work off of either a cellular or wireless connection and relay on either low voltage or 120v plug in power.
App
The Aware Buildings app allow you to,....
Gateway
Gateways are placed at various
intervals and locations throughout
the building. The work off of either a cellular or wireless connection and relay on either low voltage or 120v plug in power.